Page 1 of 1


Posted: Fri Mar 14, 2014 6:47 am
by Crawfish
What's your favorite curved point or non curved point stainless hook. The Mustad 95170's I use seem to be more prone to crevice corrosion than they used to be. I am looking for an alternative to 5/0 Mustad 95170's.

Re: Hooks

Posted: Fri Mar 14, 2014 6:26 pm
by fveureka Qi trolling hooks seem comparable to Mustad, real sharp and stainless. I used #5 on dogs, 6&7 for hoochies and spoons.

Re: Hooks

Posted: Fri Mar 14, 2014 7:33 pm
by Crawfish
Cool I will give them a try.

Re: Hooks

Posted: Mon Apr 21, 2014 4:52 pm
by edsofish
Something I have been doing for my halibut hooks since the eyes kept corroding and breaking in a very short time is; get some aluminum picture hanging wire and cut a piece about 2 inches long. Put one end through the eye and wrap the long part around the hook shank and then bend the part that went through the eye around the shank like you did with the long part until it is tight. By doing this you are adding an anode to the hook and it keeps the hooks from corroding for a much longer time. I used to go through a box of 6/0 9510 ss very quickly and now replace the hooks when the point gets too short.

Give it a try and see how it works for you.

All the Best to all and the Best of Luck